Product Details |
|
|---|---|
| Product Code : | Network N00003 |
| Brand : | TP-Link |
| Model | TL-SG1016 |
| Product Type | 16-Port Gigabit Ethernet Switch |
| Ports | 16× 10/100/1000Mbps RJ45 Ports |
| Port Features | Auto-Negotiation / Auto MDI/MDIX |
| Switching Capacity | 32Gbps |
| Packet Forwarding Rate | 23.8Mpps |
| Stock | AVAILABLE |
Product Description
TP-Link TL-SG1016 16-Port Gigabit Switch – 16× RJ45 10/100/1000Mbps Rackmount Network Switch
TP-Link TL-SG1016 16-Port Gigabit Switch is a practical high-capacity Ethernet switch designed for expanding wired networks in offices, businesses, server rooms, CCTV installations, computer laboratories, retail environments and other network deployments that require multiple Gigabit Ethernet connections. With 16× 10/100/1000Mbps RJ45 ports, automatic negotiation, Auto MDI/MDIX, a 32Gbps switching capacity and a 1U 19-inch rackmount steel chassis, the TL-SG1016 provides a straightforward way to connect and expand a Gigabit LAN.
The switch uses a Plug and Play approach, allowing compatible Ethernet devices to be connected without requiring complicated initial configuration. Its fanless design helps provide quiet operation, making it suitable for offices and other environments where reduced equipment noise is desirable.
Note: Specifications can vary by hardware revision. Always verify the exact hardware version and regional specification supplied with the unit before purchase.
Why Choose the TP-Link TL-SG1016?
- 16 Gigabit Ethernet ports for connecting multiple wired devices.
- 10/100/1000Mbps Auto-Negotiation allows connected devices to operate at their supported Ethernet speed.
- 32Gbps switching capacity provides high aggregate switching bandwidth for a 16-port Gigabit switch.
- 23.8Mpps packet forwarding rate supports efficient packet processing.
- Auto MDI/MDIX helps simplify Ethernet cabling by automatically detecting cable requirements.
- Store-and-Forward switching provides reliable packet forwarding.
- Fanless design enables quiet operation.
- 1U 19-inch rackmount form factor makes it suitable for compatible network racks and cabinets.
- Plug and Play installation reduces setup complexity.
- 8K MAC address table supports a substantial number of learned network addresses.
- 10KB Jumbo Frame support is available according to the current TP-Link specification.
Best Feature: 16-Port Gigabit Connectivity in a 1U Rackmount Design
The standout feature of the TP-Link TL-SG1016 is the combination of 16 Gigabit RJ45 ports and a compact 1U 19-inch rackmount chassis. Instead of using several smaller switches to connect numerous wired devices, a single 16-port switch can centralize network connections in an office, server rack, network cabinet, computer room or structured cabling installation.
Each RJ45 port supports 10/100/1000Mbps Ethernet with automatic negotiation. This means the switch can work with a mixture of compatible Fast Ethernet and Gigabit Ethernet devices, with each connection negotiating its appropriate speed.
The rackmount form factor also makes the TL-SG1016 particularly useful for organized network installations where equipment is installed inside a standard 19-inch rack or cabinet.
Plug and Play Network Expansion
The TP-Link TL-SG1016 is designed for straightforward installation. Connect the switch to power, connect Ethernet cables to the RJ45 ports, and connect computers, printers, access points, IP cameras, servers, routers or other Ethernet devices as required.
For typical basic switching applications, the TL-SG1016 does not require complicated software configuration before devices can communicate across the LAN.
Gigabit Ethernet Performance
The TL-SG1016 provides 16× 10/100/1000Mbps RJ45 ports and a 32Gbps switching capacity. The specification also lists a 23.8Mpps packet forwarding rate, an 8K MAC address table and 10KB jumbo frame support.
This makes the switch suitable for network expansion where multiple computers and Ethernet devices need wired Gigabit connectivity.
Auto-Negotiation and Auto MDI/MDIX
Every RJ45 interface supports Auto-Negotiation and Auto MDI/MDIX. Auto-Negotiation allows the port to determine the appropriate Ethernet connection speed, while Auto MDI/MDIX helps eliminate the need to manually determine whether a straight-through or crossover cable is required for compatible connections.
Fanless and Quiet Operation
The current TP-Link specification identifies the TL-SG1016 as fanless. A fanless switch can be particularly useful in offices, work areas, network cabinets and other locations where minimizing equipment noise is important.
Rackmount Network Installation
The TL-SG1016 has a 440 × 180 × 44mm chassis and is specified as a 16-Port Gigabit Rackmount Switch. Its approximately 1U-high chassis is designed for compatible 19-inch rack installations.
This makes it suitable for centralized network equipment deployments, including server racks, network cabinets and structured cabling environments.
TP-Link TL-SG1016 Full Specifications
| Specification | Details |
|---|---|
| Brand | TP-Link |
| Model | TL-SG1016 |
| Product Type | 16-Port Gigabit Ethernet Switch |
| Ports | 16× 10/100/1000Mbps RJ45 Ports |
| Port Features | Auto-Negotiation / Auto MDI/MDIX |
| Switching Capacity | 32Gbps |
| Packet Forwarding Rate | 23.8Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 10KB |
| Forwarding Mode | Store-and-Forward |
| Network Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x; current documentation also lists IEEE 802.1p |
| Ethernet Media | 10BASE-T: UTP Category 3, 4 or 5 cable up to 100m; 100BASE-TX/1000BASE-T: UTP Category 5, Category 5e or above up to 100m |
| Power Supply | 100–240VAC, 50/60Hz |
| Fan | Fanless |
| LED Indicators | Power, 1000Mbps, Link/Act |
| Dimensions | 440 × 180 × 44mm (17.3 × 7.1 × 1.7 inches) |
| Rack Format | 1U 19-inch Rackmount |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 10%–90% RH, non-condensing |
| Storage Humidity | 5%–90% RH, non-condensing |
| Certifications | CE, FCC, RoHS |
| Installation | Plug and Play |
Compatibility
The TP-Link TL-SG1016 is compatible with standard Ethernet devices equipped with compatible RJ45 Ethernet ports. It can be integrated into networks containing different brands of computers, printers, routers, wireless access points, servers, IP cameras and other Ethernet-based equipment.
Compatible Network Devices
- Desktop computers with Ethernet/LAN ports
- Laptop computers using compatible Ethernet adapters or docking stations
- Network printers
- Network-attached storage (NAS) devices
- Servers with RJ45 Gigabit Ethernet ports
- Wireless access points with Ethernet uplink ports
- Routers with Gigabit LAN ports
- Compatible IP cameras and NVR network connections
- VoIP phones with Ethernet connectivity
- Smart TVs and media devices with Ethernet ports
- Gaming PCs and compatible gaming consoles with Ethernet ports
- Network storage and backup systems
- Ethernet-enabled CCTV equipment
- Other 10/100/1000Mbps Ethernet devices
Compatible Ethernet Cabling
- Cat5 Ethernet cable
- Cat5e Ethernet cable
- Cat6 Ethernet cable
- Cat6A Ethernet cable
- Other compatible twisted-pair Ethernet cabling meeting the relevant Ethernet standard
For Gigabit Ethernet operation, Cat5e or better is generally the preferred cabling choice. TP-Link's specification lists 1000BASE-T over UTP Category 5, Category 5e or above with a maximum cable length of 100 meters per Ethernet segment.
Brands and Equipment That May Need the TL-SG1016
The TL-SG1016 is a standards-based Ethernet switch, so it is not limited to TP-Link networking equipment. It can be used to expand networks containing compatible equipment from many manufacturers.
- TP-Link: routers, access points, Omada-compatible network deployments and other Ethernet equipment
- Ubiquiti: compatible UniFi and other Ethernet-based network equipment
- MikroTik: routers and network equipment with Gigabit Ethernet ports
- Cisco: compatible routers, switches, access points and network devices
- Hikvision: compatible IP cameras, NVRs and network equipment
- Dahua: compatible IP cameras, NVRs and Ethernet equipment
- Ruijie: compatible switches, routers and access points
- Netgear: compatible routers, switches and network devices
- ASUS: compatible routers and Ethernet-enabled devices
- Synology: NAS systems with Ethernet connectivity
- QNAP: NAS systems and network equipment with compatible Ethernet ports
- HP: compatible computers, printers and network equipment
- Dell: compatible servers, workstations and network devices
- Lenovo: compatible computers and servers with Ethernet connectivity
Compatibility depends on the network device having a compatible Ethernet interface and the appropriate cabling. The TL-SG1016 should not be confused with PoE switches, managed switches or 10Gbps switches; this model is intended primarily for Gigabit Ethernet switching.
Ideal Applications
- Small and medium office networks
- Corporate wired LAN expansion
- Computer laboratories
- Schools and training centers
- Retail stores
- Warehouses
- Server rooms
- Network cabinets
- Structured cabling installations
- Business CCTV network infrastructure
- IP camera network expansion where PoE power is supplied separately
- NAS and file-server networks
- Gaming and workstation LANs
- Internet cafe and computer shop networks
- Home or advanced residential wired networks
Important: TL-SG1016 Is Not a PoE Switch
The TP-Link TL-SG1016 should not be selected when your primary requirement is to provide electrical power through Ethernet. It is a Gigabit Ethernet switch rather than a PoE power-sourcing switch.
If you need to power PoE IP cameras, wireless access points or VoIP phones directly through network cables, select an appropriate PoE switch or use compatible external PoE equipment.
TL-SG1016 vs Other 16-Port Network Switches
When searching for a 16-port Gigabit switch, buyers should compare the number of ports, Ethernet speed, switching capacity, rackmount capability, PoE support, management features, noise level and intended application.
The TL-SG1016 is particularly suited to users who need 16 Gigabit RJ45 connections, rackmount installation and straightforward Plug and Play switching rather than advanced Layer 2 management features.
High-Intent SEO Keywords
TP-Link TL-SG1016, TP-Link TL SG1016, TL-SG1016 switch, TL SG1016 switch, TP-Link 16 port switch, TP-Link 16-port Gigabit switch, 16 port Gigabit switch, 16 port network switch, 16 port Ethernet switch, 16 port LAN switch, 16 port RJ45 switch, Gigabit Ethernet switch, Gigabit LAN switch, 1000Mbps network switch, rackmount Gigabit switch, 1U rackmount switch, 19 inch network switch, rackmount network switch, office network switch, business network switch, Ethernet network switch, wired network switch, LAN network switch, computer network switch, network expansion switch, 16 port RJ45 Gigabit switch, TP-Link rackmount switch, TL-SG1016 price, TL-SG1016 specifications, TL-SG1016 Gigabit switch, best 16 port switch, network switch for office, network switch for server room, network switch for CCTV, network switch for computers, Gigabit switch for business
Related VAHFRA Network Products
Explore related networking products and accessories available through VAHFRA using these targeted internal search links:
- TP-Link Gigabit Switches – Browse related TP-Link Gigabit networking products.
- 16-Port Gigabit Switches – Find other 16-port network switch options.
- Network Switches – Explore Ethernet switches for office and business networks.
- TP-Link Network Products – Find related TP-Link networking equipment.
- Gigabit Ethernet Products – Browse Gigabit networking products and accessories.
Recommended Internal Linking Strategy for This Product
For stronger topical relevance on vahfra.com, link this TL-SG1016 article to related product pages using descriptive anchor text rather than repeatedly using the exact same keyword.
- Primary anchor: TP-Link 16-Port Gigabit Switch
- Secondary anchor: 16-Port Network Switch
- Secondary anchor: Gigabit Ethernet Switch
- Secondary anchor: Rackmount Network Switch
- Secondary anchor: TP-Link Network Switch
Use the five internal search URLs above as contextual links within the article and also consider linking from relevant TP-Link router, access point, Ethernet cable, rackmount accessory, CCTV networking and other Gigabit networking product pages back to this TL-SG1016 page.
Frequently Asked Questions
Question 1: What is the TP-Link TL-SG1016?
Answer: The TP-Link TL-SG1016 is a 16-port Gigabit Ethernet switch with 16× 10/100/1000Mbps RJ45 ports designed for expanding wired networks.
Question 2: How many ports does the TL-SG1016 have?
Answer: The TL-SG1016 has 16 RJ45 Gigabit Ethernet ports. Each port supports 10/100/1000Mbps Ethernet with Auto-Negotiation and Auto MDI/MDIX.
Question 3: Is the TP-Link TL-SG1016 a Gigabit switch?
Answer: Yes. All 16 RJ45 ports support Gigabit Ethernet up to 1000Mbps when connected to compatible Gigabit equipment and cabling.
Question 4: Is the TL-SG1016 Plug and Play?
Answer: Yes. The TL-SG1016 is designed for straightforward Plug and Play network expansion without complicated initial configuration for basic switching applications.
Question 5: Can the TL-SG1016 be installed in a 19-inch rack?
Answer: Yes. The TL-SG1016 is specified as a 1U 19-inch rackmount Gigabit switch and measures approximately 440 × 180 × 44mm.
Question 6: Is the TP-Link TL-SG1016 fanless?
Answer: Yes. TP-Link's current specification identifies the TL-SG1016 as fanless, making it suitable for installations where quiet network equipment is preferred.
Question 7: Does the TL-SG1016 support Cat5e and Cat6 cables?
Answer: Yes. The Gigabit Ethernet interface supports compatible UTP Category 5, Category 5e or above cabling. Cat5e and Cat6 are common choices for Gigabit network installations.
Question 8: Can I use the TL-SG1016 with computers, printers, routers and access points?
Answer: Yes. Compatible Ethernet-enabled computers, printers, routers, wireless access points, servers, NAS devices and other network equipment can be connected through its RJ45 ports.
Question 9: Does the TP-Link TL-SG1016 provide PoE?
Answer: No. The TL-SG1016 is a standard Gigabit Ethernet switch and should not be selected when PoE power delivery through Ethernet is required.
Question 10: Who should buy the TP-Link TL-SG1016?
Answer: It is suitable for offices, businesses, schools, computer rooms, server rooms, network cabinets, structured cabling installations and users who need 16 wired Gigabit Ethernet connections in a rackmount design.
TP-Link TL-SG1016 – Final Product Summary
The TP-Link TL-SG1016 16-Port Gigabit Switch is a practical choice for expanding a wired Ethernet network with up to 16 Gigabit RJ45 connections. Its 32Gbps switching capacity, 23.8Mpps forwarding rate, 8K MAC address table, 10KB jumbo frame support, Auto-Negotiation, Auto MDI/MDIX, fanless design and 1U 19-inch rackmount chassis make it well suited to organized office, business and network infrastructure deployments.
If you are searching for a TP-Link 16-port Gigabit switch, 16-port RJ45 network switch, rackmount Ethernet switch, 16-port LAN switch or Gigabit network switch, the TL-SG1016 is designed specifically around these requirements.
Shop networking products and computer accessories at VAHFRA: VAHFRA.com
: